About GigaCraft

Last updated: September 18, 2026

GigaCraft publishes measured, step-by-step woodworking plans for home builders. Every project lists the full material bill, a cut list with finished dimensions, the tools you actually need, and a numbered build sequence with safety notes.

Our plans are written for accuracy first. Dimensions are given in inches, boards are referenced by their nominal size (for example, a 1×6 is actually 3/4 in × 5-1/2 in), and every step assumes standard dimensional lumber unless a plan says otherwise.

We do not sell tools or lumber. Where a project benefits from a particular joint or finish, we explain why it is used so you can adapt the plan to what you have on hand.

How we work

Each plan is drafted by working woodworkers and then checked against the stock it calls for. We measure, cut and assemble before we publish, so the cut list and the step order you read have been tested rather than estimated.

Corrections

Found a dimension that does not add up, or a step that could be made safer? Tell us on the contact page and we will fix the plan and credit the correction.